Model NO.: FMS-01
Shape: Long or Round
Transport Package: 25kg/Bag, 1FCL=27tons
Specification: small granules
Origin: China

Product Description
       Our desiccant masterbatch is designed specifically for removing moisture from recycled PE/PP/PS/EVA/HIPS during processing. Its great advantage is it can effectively absorb moisture while processing, so that the recycled PE/PP/PS/EVA/HIPS scraps and granule could be directly used to make plastic products without pre-drying.And the product quality could be proved to be very good. 
Desiccant Masterbatch Manufactured for Recycled Materials

Desiccant Masterbatch Manufactured for Recycled Materials
     
       Actually,We add high MI PE into our desiccant masterbatch instead of common low MI plastic as carrier to make it perform better,so the dispersion,liquidity and effectiveness are very good and our desiccant masterbatch quality is better!!


Our moisture absorbent master batch compared with the driers on the costs:

Method Labor cost Equipment depreciation Electricity cost Material cost Safeguard fee efficiency
Driers Need more workers, all the process need to take good care Need to purchase a new equipment, cause the depreciation fee cause extra electric cost while drying The material weight lost while drying because the moisture was evaporated Much noise It will extend the working time
Moisture absorber The process no need to add extra workforce No need to purchase new equipment No extra electric cost The moisture was absorbed by the master batch, which still stays in the material No noise Save time and make high efficiency

 
NOTE: 
      Normally 2-5% added for film product and 4-6% for sheet/board/pipe product, just mix it with the resin material like the color master batch, but please not dry the mixed material with oven or some other machine, the mixing shall under normal temperature.

     There are two key points that should be specially noticed while processing:
1. premixing:  high temperature mixing before processing is not permitted, so do not heat up the stirring machine or material, and do not let the mixed material stay in the stirring machine for a long time or it will absorb moisture while mixing and block the screen. Simple stirring under normal temperature is ok.
 
2. storing: this master batch should be used within 12-24 hours after the pack has been opened for it absorbs water moisture very well when it was exposed to air.

Package
         For dessicant MB,we have two kinds of packages,one is 25kg cartons with 5*5kg Vacuum bag;another one is Soft Package,we use 25kg kraft paper bags with 5*5kg double-layer pe bag.(25kg/bag,1FCL=27tons)

Desiccant Masterbatch Manufactured for Recycled MaterialsDesiccant Masterbatch Manufactured for Recycled Materials
Desiccant Masterbatch Manufactured for Recycled Materials
FAQ

1. Do your precious Products need to protect from sunshine?

Indeed, if your precious products are using in the outdoor, we can add Anti-UV agent in the Masterbatch to make it more high Light/Color Fastness.

2. Do your precious Products need to be more white and get rid of bad smell?

Indeed, if your precious products are made of recycled plastics, we can add whiten agent or special fragrance agent in the Masterbatch to make it more white and get rid of bad smell.

3. How about the quality control of your products?

1) We pay great attention to quality control from raw materials to finished products, each production link      meets the quality system of ISO9001-2008.

2) All products meet RoHS standard.

3) All products are approved by SGS.

4. How to get a quotation?

 A). send us a sample

 B). inform us your specific requirements or the technical data sheet:

   a) Color( e.g. Pantone color number)

   b) Pigment concentration

   c) Final products application

   d) Polymer carrier

   e) Heat fastness level

   f)  Light fastness level

   g) MFI

We will try our best to work out the relative solution to match your needs.

5. What's the shipping freight?

It will depend on the volume and weight of the materials. Pls. tell us the nearest seaport or airport, we can quote you specially. 

       We can also customize desiccant masterbatch according to your requirements,so please don't hesitate to contact me!^_^
Tel/86-15889980235

 

PVC Waterproofing Roll Material

Polyvinyl Chloride (PVC) waterproof membrane is a new polymer waterproof membrane which is made from polyvinyl chloride resin, and mixed with plasticizer, filler, antioxygen, ultraviolet absorber and other auxiliaries. we adopts automatic mixing of raw material, double-screw extruder and delicate three-roller calender equipment in the PVC membrane production. PVC waterproof membrane features dimensional stability and high tensile strength, being a best choice for many civil and industrial projects. PVC waterproof membrane mainly falls into two categories: Homogeneous & Reinforced, each with different thickness specifications. Reinforced PVC waterproof membrane employs a fabric reinforced layer in the middle, it enhances the breaking and tear strength.

PVC on roll

Features:
- Excellent performance in aging resistance, service life of 20 years for exposed use, and 50 years for non-exposed application
- High puncture and rooting resistance, especially suitable for planting roof system
- Easy installation and hot-air welding seam, environment friendly
- High tensile strength and elongation, size stability
- Good plasticity, convenient for detailing and coners installation
- Inherently fire resistant

Performance Characteristics:

Anti-aging , high plasticity , root system penetration resistance , inflaming retarding , environmental protection stain resistance , high tensile strength ,good elongation , excellent dimensional stability , and less cost.

Executive Standard:

GB18173.1-2012 GB12952-2011

Specification:

Thickness: 1.0-2.0mm Width: 2m

Application:

It' s suitable for industry and construction various roofing waterproofing ,basement , reservoirs , dams , highw ay tunnels , railway tunnel , civil air defense projects , grain depot , landfill , wastewater treatment construction waterproofing etc.
Technical Data:

ASTM Standard D-4434/D-4434M ASTM Standard for PVC Sheet Roofing

No.

Item

Specification

Type II

Type III

Type IV

1

Overall thickness of PVC sheet, min, mm (in.)

1.14 (0.045)

1.14 (0.045)

0.91 (0.036)

2

Thickness over scrim, min. mm (in.)A

0.40 (0.016)

0.40 (0.016)

0.40 (0.016)

3

Tensile strength at break, min, MPa (psi):

Machine direction

10.3 (1500)

...

...

Cross-machine direction

10.4 (1500)

...

...

4

Breaking strength, min, kN/m (lbf/in.)

...

35 (200)

48 (275)

5

Elongation at break, min, %

Machine direction

250

15B

25B

Cross-machine direction

220

15B

25B

6

Seam strength, min, % of tensile or breaking strength

75

75

75

7

Retention of properties after heat aging

Tensile strength, min, % of original

90

...

...

Breaking strength, min, % of original

...

90

90

Elongation, min, % of original

90

90

90

8

Tear resistance, min, N (lbf)

45.0 (10.0)

...

...

9

Tearing strength, min, N (lbf)

...

200 (45.0)

400 (90.0)

10

Low temperature bend

pass

pass

pass

11

Accelerated weathering test

Cracking (73 magnification)

none

none

none

Crazing (73 magnification)

none

none

none

12

Linear dimensional change, max, %

0.1

0.5

0.5

13

Change in weight after immersion in water, max, %

±3.0

±3.0

±3.0

14

Static Puncture Resistance

pass

pass

pass

15

Dynamic Puncture Resistance

passC

passC

passC




Pvc Waterproofing Roll Material,Flexible Pvc Material Waterproof Roll,Pvc Sheet Rolls For Waterproofing,Pvc Waterproof Roll Membrane Material

Shandong Tianhai New Materials Engineering Co., Ltd , https://www.chinatinhy.com